FOR SALES AND ADVICE 01253 622449
Shopping Basket: £0.00 | ViewView Basket | CheckoutCheck out

Metcalfe - 10/15lb Potato Peeler EP10 NA10 EP15 NA15

Printer Friendly Tell a Friend
Metcalfe - 10/15lb Potato Peeler EP10 NA10 EP15 NA15

Metcalfe - 10/15lb Potato Peeler EP10 NA10 EP15 NA15

Highlights:
METCALFE
EP10 NA10 EP15 NA15
Price 936.00 (1,123.20 incl. VAT)
Model No.:
Options:
Pedestal (9T20) ( +215.00)
Mobile Trolley (9T21) ( +244.00)
Guarded discharge chute painted finish (9T19) ( +65.00)
Guarded discharge chute stainless steel finish (9T24) ( +72.00)
Small external interceptor (9T22) ( +146.00)
Small waste disposal adaptor (9T17) ( +105.00)
Sink Skip (TS06) ( +68.00)
Length of waste pipe, elbow & coupling (9T18) ( +43.00)
3ft Length water inlet hose and tap connector (9P64) ( +28.00)
Installation kit : 3ft length water inlet hose, tap connector, length of waste pipe,elbow,coupling and sink skip (9T28) ( +121.00)
Type 'A' air gap tun dish (9T25) ( +40.00)
Qty:
Product Benefit
  • Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine
  • Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean. Cleaning should be carried out on a daily basis
  • Water inlet. Hose union with nozzle and provision for fitting on either side
  • Water outlet. Tapped 11⁄2" BSP ready for waste pipe to be connected. Provision for fitting on either side
  • Waste disposal adaptor. Waste pipe can be connected direct to the drain. Gives an additional water supply to the waste outlet to flush away the sludge. Water Byelaws Scheme approved product when connected to water header tank (optional extra)
  • External interceptor with tank and basket; a sink basket only or a length of waste pipe with elbow and coupling, if required (optional extra)
  • Constructed from food grade, non-corrosive, aluminium alloy castings
  • Spindle housing and chute cast integrally, eliminating joints and possible leakage
  • Available in grey hammer paint finish or in a natural aluminium
  • Sink-top/counter-top, pedestal or trolley mounted
  • Complies with all relevant safety standards and designed for ease of maintenance and cleaning
  • Guarded discharge chute protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working
  • No lubrication is required. All bearings are grease packed and permanently sealed
  • V-belt driven for noiseless transmission, with provision for belt tensioning if required
  • Rotor plate coated on both sides, doubling its life. Fine grained abrasive for new potatoes on one side and coarse grained for old potatoes on the other
1 YEAR WARRANTY.
Model No Finish Capacity (kgs) Overall Height (mm) Height Peeling Chamber (mm) Usage Discharge outlet (mm) Weight (kgs/lbs) Motor (hp) Price
EP10 Hammer grey painted 4.5 370 320 Medium duty 38 27/60 0.25 936
NA10 Natural aluminium 4.5 370 320 Medium duty 38 27/60 0.25 1007
EP15 Hammer grey painted 6.8 450 390 Medium duty 38 30/66 0.33 1151
NA15 Natural aluminium 6.8 450 390 Medium duty 38 30/66 0.33 1225
SIGN UP FOR newsletter
UK registered company no. 210544. Registered office: 193-195 Dickson Road, Blackpool. FY1 2HQ


eCommerce by Sayu