FOR SALES AND ADVICE 01253 622449
Shopping Basket: £0.00 | ViewView Basket | CheckoutCheck out

Metcalfe - 14lb & 28lb Low & High Pedestal Potato Peelers

Printer Friendly Tell a Friend
Metcalfe - 14lb & 28lb Low & High Pedestal Potato Peelers

Metcalfe - 14lb & 28lb Low & High Pedestal Potato Peelers

Highlights:
METCALFE
Price 1,749.00 (2,098.80 incl. VAT)
Model No.:
Options:
Guarded Discharge chute painted finish for 14lb ( +66.00)
Guarded Discharge chute painted finish for 28lb ( +77.00)
Filtershield ( +483.00)
Large external Interceptor ( +226.00)
Waste disposal adaptor ( +110.00)
Stainless steel waste disposal adaptor ( +236.00)
Type 'A' air gap tundish ( +40.00)
3ft Length Water inlet hose and tap connector ( +28.00)
Qty:
Product Benefit
  • Powerful direct gear drive motors. The 14lb (6.3kg) peelers have 0.5hp geared units, The 28lb (12.6kg) peelers have 0.5hp geared units
  • Standard height or sink height models available
  • Designed to enable the user to operate, clean and maintain with the minimum of effort
  • Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working
  • Motor and gearbox units are housed inside the pedestal therefore no external projections
  • The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded
  • Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean . Cleaning should be carried out on a daily basis
  • Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine
  • All peelers supplied with a wall mounted starter which incorporate the on switch, emergency stop, no-volt release and overload protection features - fitted with 13amp plug
  • All Metcalfe pedestal peelers are available with either single phase or three phase motors
  • Machines fitted with a water inlet and hose connection incorporating an air break. Stop tap can be fitted if required. Provision for fitting water inlet on either side of machine
  • Waste outlet screwed 2" BSP female
1 YEAR WARRANTY.
Model No Code Phase Capacity (kgs) Usage Weight (kgs/lbs) Motor (hp) Price
14LB Low Pedestal Peeler 5P145 1 6.3 Heavy duty 60 0.5 1749
14LB Low Pedestal Peeler 5P146 3 6.3 Heavy duty 60 0.5 1860
14LB High Pedestal Peeler 5P147 1 6.3 Heavy duty 64 0.5 1782
14LB High Pedestal Peeler 5P148 3 6.3 Heavy duty 64 0.5 1891
28LB Low Pedestal Peeler 5P285 1 12.6 Heavy duty 67 0.5 2110
28LB Low Pedestal Peeler 5P286 3 12.6 Heavy duty 67 0.5 2221
28LB High Pedestal Peeler 5P287 1 12.6 Heavy duty 71 0.5 2143
28LB High Pedestal Peeler 5P288 3 12.6 Heavy duty 71 0.5 2252
SIGN UP FOR newsletter
UK registered company no. 210544. Registered office: 193-195 Dickson Road, Blackpool. FY1 2HQ


eCommerce by Sayu